Marantz NR1605 Wi-FiSetup, oScan Networks, oUse iOS Device, Contents, Connections, Playback, Tips

Contents Connections Playback Settings Tips Appendix

Wi-Fi Setup

Connect to a wireless LAN (Wi-Fi) router.

The router can be connected in the following ways. Select the connection method to suit your home environment.

oScan Networks

Select the network you wish to connect to from the list of possible networks shown on the TV screen.

1.Select the network you wish to connect to from the list of wireless networks.

Select “Rescan” if the network cannot be found.

2.Enter your password and select “OK”.

oUse iOS Device

Use your iOS device (iPhone/iPod/iPad) to connect to the network. By connecting your iOS device to this unit, the unit can be automatically connected to the same network as your device.

This unit can be connected to your iOS device in two ways, using a USB cable and using Wi-Fi.

nWhen connecting using Wi-Fi

1.Select “Wireless connection” on the TV screen.

2.Check that your iOS device is connected to the wireless LAN (Wi-Fi) router and select “Marantz NR1605” from “SET UP NEW AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration screen of your iOS device.

3.Tap “Next” on the screen of the iOS device.

The iOS device firmware version needs to support iOS7 or later.

nWhen using a USB cable

1.Select “USB cable” on the TV screen.

2.Check that your iOS device is connected to the wireless LAN (Wi-Fi) and connect it to the USB port on the front panel using a USB cable.

3.Select “Connect” on the TV screen.

4.Tap “Allow” when the connection message appears on the screen of your iOS device.

The iOS device firmware version needs to support iOS5 or later.

Front panel Display Rear panel 195 Remote Index