8

SOURCE

FILE

STEREO

R

0dB

-20dB

 

L

9

 

 

 

 

 

 

MONITOR

AUDIO OUT

MIC ATTEN

10

OFF

ON

SINGLE

ALL

 

FLAT

OFF

 

 

6

 

 

 

 

 

 

PRE REC

REPEAT

 

ANC

 

 

 

 

 

LIMITER

 

OFF

ON

OFF

ON

ALC

MANUAL

 

7

 

 

 

 

 

 

INPUT LOCK

EDL PLAY

LEVEL CONT.

 

a

 

 

 

EDIT

 

 

 

 

 

 

 

 

INPUT

A-B REPEAT

 

 

MARK

 

 

 

OFF ON

 

6. PRE REC switch

 

 

 

 

 

 

 

 

 

 

 

 

This switch lets you turn

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

off pre record cache if it

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRE REC

 

is not desired.

 

 

 

 

 

 

 

 

 

 

 

 

When power is on and the PMD671 is in REC/ PAUSE the recorder is constantly saving about 4 seconds* of audio input. This is called pre record cache. When recording is resumed from REC PAUSE by sliding the REC switch, the pre- recorded seconds are recorded.

OFF: Turns the pre-record cache off.

ON: Leaves the pre-record cache on.

*Cache time varies with recording conditions:

24-bit PCM – 1 second

16-bit PCM, MP2, MP3 – 4 seconds

16-bit PCM, MP3 with RAW – 2 seconds.

Factory default: PRE REC switch at ON.

STEREO

8. AUDIO OUT switch

L R

This switch selects the audio output channel for playback.

AUDIO OUT

Applies to playback output to LINE OUT, DIGITAL OUT, and Internal speaker or headphones.

L:Audio recorded on the Left channel is output to both the left and right output channels.

STEREO: Audio recorded on the Left channel is output to the left output channel, and audio recorded on the Right channel is output to the right output channel. Both channels are output to the internal speaker.

R:Audio recorded on the Right stereo channel is output to both the left and right output channels.

Factory default: ANALOG OUT switch at STE- REO.

0dB -20dB

9. MIC ATTEN switch

 

The microphone attenuation

MIC ATTEN

switch permits the direct use

of microphones that differ in

 

 

sensitivity.

0dB: No microphone attenuation.

-20dB:Input from a microphone(s) connected to the XLR MIC IN jacks is cut by -20dB.

OFF ON

INPUT LOCK

7.INPUT LOCK switch The INPUT LOCK switch lets you lock your selected input settings with a switch covered by the Security cover.

Factory default: MIC ATTEN switch at 0dB.

 

 

 

 

 

 

SINGLE

 

 

10. REPEAT switch

OFF

 

 

ALL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lets you endlessly repeat

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback of a track or entire

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REPEAT

 

 

 

memory card.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF: When the INPUT LOCK switch is at OFF, push and release the INPUT button (a) to tab through the input choices. The selection “times out” to the displayed input choice in 3 seconds.

 

TIME

 

 

 

 

 

 

 

REC REMAIN

L

 

 

 

 

 

 

 

 

-dB

00

40

20

12

6

2

0 over

OFF: No repeat.

SINGLE: During playback, the current track is repeated. When playback reaches the end of the track, it automatically starts playback from the

R

ExampleMIC display

-dB

beginning of that track.

MIC

ON: When the INPUT LOCK switch is at ON, pushing the INPUT button (a) does nothing (skips the input selection choices).

Factory default: INPUT LOCK switch at OFF.

ALL: During playback, all tracks are repeated. When playback reaches the end of the last track, it automatically starts playback from the beginning of the first track.

Factory default: REPEAT switch at OFF.

Note:

For other methods of repeat playback, see the A-B REPEAT button and/or EDL A-B looping (pages 18 and 19).

- 15 -