1.Select the ID1 menu choice:

a.From stop, press and hold the

MENU button

for about 2 seconds. Preset will appear (flash- ing) in the display.

b.While Preset is flashing, double click the

ENTER button . The last Menu choice selected will appear.

2.Press and release the F.FWD/+ button repeatedly until an

ID choice is displayed and flashing.

3.Press and release the F.FWD/+ button or the -/F.REV

button to

tab through the ID choices.

When correct press and release the ENTER

button to accept the ID# choice and

switch to the highest number position.

4.Press and release the F.FWD/+ button or the -/F.REV

button to tab through the digits 0 through 9.

5.When correct, press and release the ENTER

button to switch to the next digit.

6.Press and release the F.FWD/+ button or the -/F.REV

button to tab through the digits 0 through 9.

Repeat steps 5 and 6 until all six digits are set.

7.Press and release the ENTER button to switch to ID#

flashing.

8.Press and release the F.FWD/+ button to switch to the next ID#.

9.Repeat 5 - 8 for all three ID numbers.

10.When the upper display is flashing, press

and release the F.FWD/+ button to switch to another menu choice, or press and release the MENU/STORE button to write the menu change(s) and return to stop mode.

Menu Default

The Default menu choice resets all Menu items to their defaults. This is convenient if you are setting up a new configuration because you don't have to check all the settings, you know they are at the default.

Defaults are listed for each menu item.

Note:

US defaults are used for illustration. See page 59 for a table of menu defaults.

Quick instructions

 

 

Press & hold

MENU/STORE 2 sec

....... Preset

Double Click ENTER

..................

RecFormat

Press F.FWD/+

until

..........................

Default

Press ENTER

..................................

Execute

Press ENTER

.......................... EXECUTING

...............................................................

 

exits

 

 

 

 

1.From stop, press and hold the MENU/ STORE button for

about 2 seconds. Preset is flashing.

2.With Preset flashing in the display, double click the ENTER

button . Menu item is flashing.

- 45 -