Controls and Connections
Top continued
TRACK JUMP | F.FWD / + | |
REC |
|
|
UNDO |
|
|
MARGIN RESET | PLAY / PAUSE | STOP |
23
USB | MENU/STORE |
| ENTER |
| CANCEL |
|
|
|
|
|
|
MARGIN RESET | 23. MARGIN RESET/ |
| USB MENU/STORE |
| buttons |
USB MENU/STORE | Several functions depending |
| on state of the PMD671. |
During record, press and release to reset the peak level margin.
Example display |
|
| ||||||||||||||||
| TRACK TIME | |||||||||||||||||
with level margin at |
| L |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| 00 |
|
| 40 |
|
| 20 |
|
| 12 |
| 6 | 20 over | |||||
| R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
OV before pressing | TRACK |
| INT | |||||||||||||||
| MIC | |||||||||||||||||
the MARGIN RE- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| level margin | ||||||||||||||||
SET button. |
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The level margin displays the highest level achieved since the track began, or the MARGIN RESET button was pressed and released. OV indicates a margin over 0dB.
USB buttonConnects the CF card via the USB port to a connected device (usually a computer).
From power off, press and hold the USB button while you slide the PMD671's POWER switch to the right.
This display appears.
The CF card in the PMD671 appears as an external drive on a connected computer.
Power off to disconnect.
See page 51, How to connect via the USB port.
MENU/STORE buttonPress and hold for about 2 seconds to enter menu mode.
d | c |
|
|
| - |
TRACK JUMP | F.FWD / + | |
REC |
|
|
UNDO |
|
|
MARGIN RESET | PLAY / PAUSE | STOP |
USB MENU/STORE | ENTER | CANCEL |
a b
Press and release during menu operations to store the changed values.
Menu operationsMenu operations let you fine tune how the PMD671 is set up, including the recording parameters for your specific recording situation.
The PMD671 is always recording using Preset1, 2 or 3. To modify the recording setup, you modify one of those three presets.
The Menu procedure starts with selecting one of the Presets, then modifying either the settings within that Preset, or the General settings for Date and time, date format, beep and/or battery type.
Select PresetQuick instructions |
| |
Press & hold | MENU/STORE 2 sec | ....... Preset |
Press ENTER | ................................... | Preset# |
Press F.FWD/+ | ..................................... | set # |
Press ENTER | ...... save & switch to next item | |
Press MENU/STORE ..................... | save & exit | |
|
|
|
1.Press and hold the MENU/STORE button
(a) for about 2 seconds. Preset will appear (flashing) in the display.
Example display
2.While Preset is flashing, press and release
the ENTER button (b).
The flashing switches to the Preset choice.
continues
- 24 -