How to set or change PupPreRec

Quick instructions

 

 

Press & hold

MENU/STORE 2 sec

....... Preset

Double Click ENTER

..................

RecFormat

Press F.FWD/+

until

...................

PupPreRec

Press ENTER

.....................................

Off/On

Press F.FWD/+

........................ toggle Off/On

 

 

 

 

1.From stop, press and hold the

MENU/STORE

button for about 2 Example display seconds.

2.With Preset flashing in the display, double click the ENTER button .

3.Press and release the F.FWD/+

button until PupPreRec is displayed.

4.With PupPreRec flashing, press and release the

ENTER button

.

PupPreRec menu choice is flashing.

5.Press and release the F.FWD/+

button to

toggle between On and Off.

6.When the desired state is displayed, press and release the

ENTER button

.

The display returns to PupPreRec flashing.

You can:

•Press and release the F.FWD/+ button or the -/

F.REV button to tab to another menu choice, or

• Press and release the MENU/STORE button to write the menu changes and return to stop mode, or

•Press and release the CANCEL button to cancel all menu changes and return to stop mode.

St Mode

Stereo Mode determines which input channels are recorded onto the Left and Right channels.

There are three Stereo Modes:

Stereo - The Left input channel is recorded onto the Left channel, and the Right input channel is recorded onto the Right channel.

L-Stereo- The Left input channel is recorded onto the Left channel, and onto the Right channel. 0-20dB- For secure recording, the Left channel is recorded at the normal record level and the Right channel is reduced by 20dB.

Notes:

•If the input is set to INT MIC and St Mode is set to 0- 20dB, the St Mode of the recording is automatically switched to L-Stereo.

•If a mono source input (INT MIC or L channel only) the mono input is also recorded on the R channel reduced by 20dB.

How to set or change St Mode

Quick instructions

 

 

Press & hold

MENU/STORE 2 sec

....... Preset

Double Click ENTER

..................

RecFormat

Press F.FWD/+

until

........................

St Mode

Press ENTER

.........

Stereo/L-Stereo/0-20dB

Press F.FWD/+

..................... tab thru modes

Press ENTER

..................................

St Mode

Press MENU/STORE ....................

store & exit

 

 

 

 

1.From stop, press and hold the

MENU/STORE button for about 2 seconds.

2.With Preset flashing in the

display, double click the ENTER button .

3.Press and release the F.FWD/+ button until St Mode is

displayed.

4.With St Mode flashing, press and release the

ENTER button .

St Mode menu choice is flashing.

- 36 -