Front continued

REC PAUSE

 

REC

 

HP/SPK VOLUME

 

 

L

 

 

 

PHONES

 

 

R

 

 

 

DISPLAY

LIGHT

KEY LOCK

REC

LEVEL

 

10

KEY LOCK

10. KEY LOCK switch

 

The KEY LOCK switch

 

secures the PMD671 in its

 

present state during

 

Record, Playback or Stop.

Slide the switch to the right to turn KEY LOCK on. "Locked" is displayed for three seconds.

Only these controls will work: Display LIGHT button.

POWER switch - Works during Playback or Stop. PRE REC switch.

Door Open is displayed.

The PMD671 automatically turns off.

Card eject

CF card slot

 

button

 

 

CF card door

Card eject button

The Card eject button has two positions: click out (a) and click in (b).

ab

If you try to operate a button or switch that is locked, "Locked" appears briefly in the display.

Example display:

 

TRACK TIME

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

-dB

00

 

 

40

 

 

20

 

12

620 over

 

R

 

 

 

 

 

 

 

 

 

 

 

 

-dB

 

 

 

INT

 

TRACK

 

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

Slide the switch to the right to turn KEY LOCK off. "Unlocked" is displayed for three seconds.

Left side

CHARGE

 

DIGITAL

 

DC IN 15V

 

IN

 

 

 

 

 

USB

OUT

 

 

 

11

 

 

12

CHARGE

11. CHARGE indicator

The CHARGE indicator is

 

 

lit when an optional Ni-Cd

 

or

 

Ni-MH battery is charging.

12. CF card compartment

Pull the compartment door open to access the CF card.

To eject a CF card:

1.If recording or in playback, push STOP . If other operations are in progress, cancel them by pushing STOP or wait for them to complete.

2.Open the CF card door*.

3.Push and release the Card eject button so it is in the click out position (a).

4.Push the Card eject button from the click out position to the click in position (b).

*Opening the CF card door turns the PMD671 off. If recording is in progress, opening the CF card door automatically stops recording and writes critical track information to properly close the file before turning off. Close the CF card door to restart the PMD671.

To insert a CF card:

1.Push and release the Card eject button so it is in the click in posi-

tion (b above).

2. Fully insert the CF card.

3.Close the CF card door.

Note: If the CF card door won't latch, check that the Card eject button is in the click in position (b above).

- 49 -