5.Press and release the F.FWD/+

button to tab

through Stereo, L-Stereo and 0-20db.

6.When the desired mode is displayed, press and release the ENTER button .

The display returns to St Mode flashing.

You can:

•Press and release the F.FWD/+ button or the -/

F.REV button to tab to another menu choice, or

• Press and release the MENU/STORE button to write the menu changes and return to stop mode, or

•Press and release the CANCEL button to cancel all menu changes and return to stop mode.

Mono Mode

Mono Mode determines which input channel(s) are recorded as the mono channel.

There are two Mono Modes:

Mono - The Left input channel is recorded as the mono channel.

LR Mono - The Left input channel and the Right input channel are mixed (combined) and recorded [(L+R)/2] as the mono channel.

How to set or change Mono Mode

Quick instructions

 

 

Press & hold

MENU/STORE 2 sec

....... Preset

Double Click ENTER

..................

RecFormat

Press F.FWD/+

until

..................

Mono Mode

Press ENTER

........................Mono/LRmono

Press F.FWD/+

..................... tab thru modes

Press ENTER

............................

Mono Mode

Press MENU/STORE ....................

store & exit

 

 

 

 

1.From stop, press and hold the

MENU/STORE

button for about 2 seconds.

2.With Preset flashing in the display double

click the ENTER button .

3.Press and release the F.FWD/+ button until Mono Mode

is displayed.

4.With Mono Mode flashing Press and release the ENTER button .

Mono Mode menu choice flashing.

5.Press and release the F.FWD/+

button to

toggle between Mono and LRMono.

6.When the desired mode is dis- played, press and

release the ENTER button .

The display returns to Mono Mode flashing.

You can:

•Press and release the F.FWD/+ button or the -/

F.REV button to tab to another menu choice, or

• Press and release the MENU/STORE button to write the menu changes and return to stop mode, or

•Press and release the CANCEL button to cancel all menu changes and return to stop mode.

Auto Mark

Auto Mark turns the automatic EDL mark feature on or off.

On - During record after a REC PAUSE, an EDL mark is added to the track.

As recording is resumed and the EDL mark is added, the following appear for a few seconds.

TRACK TIME

L

Example

-dB00 40 20 12 6 20 over

 

R

display

-dB

MARK

a b c

MARK (a) is displayed to indicate that the number (b) is the EDL mark number. "In Total" (c) reminds you that EDL marks are counted from the beginning of the CF card, not the beginning of the current track.

Off - Pause during record does not add an EDL mark to the track.

- 37 -