Manuals / Brands / Computer Equipment / Computer Hardware / Marantz / Computer Equipment / Computer Hardware

Marantz pmd671, Portable Solid State Recorder Battery power, Installing AA size batteries:, Charging the optional Ni-Cdbattery, Installing an optional Ni-Cdor Ni-MHbattery

1 64

Download 64 pages, 1.6 Mb

Battery power

The PMD671 can operate on several types of battery power.

Hint:

Keep fully charged batteries in the PMD671 when recording using AC power because as much as 30 seconds of your recording could be lost if AC power is interrupted.

Eight AA alkaline batteries and the supplied battery holder can be used. Alkaline batteries can power recording or playback for about *6 hours.

AAsize rechargeable Ni-Cd or Ni-MH batteries can be used in the supplied battery holder, but they cannot be recharged with the PMD671's built in charger.

An optional Ni-Cd battery model RB1100 can be charged in the PMD671. Ni-Cd batteries can power recording or playback for about *5 hours.

An optional Ni-MH (Nickel metal hydride) battery model RB1651 can be used and recharged with the PMD671's built-in charger. Ni-MH batteries can power recording or playback for about *7 hours.

*Using compact flash media.

Installing AA size batteries:

Power off and turn the PMD671 upside down.

Press and push in the direction of the arrow to remove the battery

compartment cover.

Install 8 AA size batteries to the

battery holder with the - ends towards the springs.

tab

ribbon

Install the battery holder with tab as shown and over the ribbon for easy battery holder removal.

Replace the battery compartment cover**.

Installing an optional Ni-Cd or Ni-MH battery

tab

ribbon

Install the battery with tab as shown and over the ribbon for easy battery removal**.

Charging the optional Ni-Cd battery

•Load the Ni-Cd battery correctly in the battery compartment.

•Connect the AC power pack and plug into power supply.

•Select Ni-Cd in the Batt type menu (page 30).

•Power the PMD671 on, then off for the charging cycle to begin.

•The PMD671 must be off during battery charging.

While charging (about 3 hours), the CHARGE indicator will be lit and steady.

When the Ni-Cd battery charge cycle is com- plete, the CHARGE indicator will be off.

**When changing battery type, be sure you change the Batt type menu setting for optimal battery performance.

- 54 -

Contents

Model PMD671 User Guide Warnings and Cautions TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAITION: ATTENTION: Important Safety Instructions WARNINGS Page Page Quick Start Table of Contents Recording setup controls A-B Repeat playback EDL Marks Left side How to connect via USB port Right side Microphone recommendations Installing the carry strap Control and Connection Diagrams Control Page Setup controls MARK/ EDIT controls Page Introduction Audio inputs may be from: Audio outputs may be from: Computer compatible Presets •Security – recording •Verify •RAW •Time Shift Playback •Automatic recording •EDL marks Features Controls and Connections 1.Speaker 2. MIC 3. POWER switch Security cover RAW (VTH - Virtual Third Head) Time Shift (Time Shift Playback) FILE: SOURCE: Time Shift 6. PRE REC switch OFF: ON: 8. AUDIO OUT switch STEREO: ANC switch Band pass FLAT: :High pass 12. EDL PLAY switch Input device(s) and channels: Stereo with MIC input L-Stewith INT MIC input Stereo with LINE input What the input selections do: 16, 17, 18. MARK EDIT buttons Mark functions: REPEAT button Adding EDL Marks Edit functions: Custom playback sequences Editing EDL Marks: Skip EDL A-Blooping How to renumber tracks How to erase tracks How to erase all EDL marks within one track How to erase all EDL marks How to format a CF card How to check a CF card (CARD CHECK) Top continued 19, 20. TRACK JUMP buttons 19. TRACK JUMP reverse button 19. REC UNDO button 23. MARGIN RESET USB MENU/STORE buttons MARGIN RESET button USB button (c) (d) Menu settings The Menu choices are: General settings Remote ID1Dscrpt ID2Origin ID3OrgRef Default How to set or change the Date Form How to set or change the Beep Automatic Power Off How to set or change Automatic Power Off Battery Type How to set or change Battery Type Rec Format Rec Format Chart Channel(s) Format Bit rate How to set or change the Rec Format param- eters Page Page Digi-INRec Format Digi-INRecFormat chart How to set or change the RAW Mode Verify does not function during MP2 record- ing How to set or change Verify How to set or change PupPreRec Stereo L-Stereo 0-20dB How to set or change St Mode Mono LR Mono How to set or change Mono Mode a b c How to set or change Auto Mark How to set or change Manual TR Minute Track How to set or change Auto TRK Seamless Play How to set or change SeamlsPly Silent Skip Manual overrides: Pause During How to set or change SilentSkp continued How to set or change SilentSkp How to set or change Auto Cue How to set or change S.Monitor How to set or change SinglePly How to set or change the Remote Mode Broadcast Wave ID numbers How to set or change ID numbers Menu Default 24. PLAY/PAUSE but ton PLAY/PAUSE button STOP/CANCEL button HP/SPK VOLUME control REC PAUSE button REC indicator REC switch Front continued PHONES jack 8.DISPLAY button During Stop: Remaining CHARGE DC IN USB How to connect via the USB port CAUTION: a b c d REMOTE 1 16. REMOTE1 jack RemoteMode: StartPause StrtStp TR Right side continued LINE OUT jacks 21. Carry studs MIC IN jacks PHANTOM Installing AA size batteries: Installing an optional Ni-Cdor Ni-MHbattery Charging the optional Ni-Cdbattery 1.REC label 2.TOTAL label 3.TRACK label 4.REMAIN label 5.TIME label 18.MIC / INT MIC label 19.LINE label 20.Record 21.Play 22.Pause Recording time chart Rec Format charts Analog inputs Digital input defaults Menu TROUBLESHOOTING Error Messages SPECIFICATIONS Digital audio system Inputs Outputs General LIMITED WARRANTY