(3mm x 10mm long)

Security

The supplied security screw requires using a small Phillips

screwdriver to open the Memory compartment door. The screw

reduces the possibility that the CF card will be misplaced or stolen.

d

c

1.Remove the plastic pin (c) and then the retainer (d).

2.Add the screw. Tighten the screw enough so that the screw cannot be removed with a fingernail.

Left side continued

 

13

CHARGE

DIGITAL

DC IN 15V

IN

 

USB

OUT

 

14 15

 

DIGITAL

13. DIGITAL IN/OUT jacks

RCA jacks for connect-

 

 

 

 

 

IN

 

 

 

 

 

ing the PMD671 to an

 

 

 

 

 

 

 

 

audio component that

 

 

 

accepts or outputs digital

 

OUT

 

 

 

 

 

audio signals.

IN: Connect to the digital out of a digital audio component. PCM audio data input at 44.1. 48, 88.2 and 96 kHz can be recorded.

Digi-IN must be selected using the INPUT button. for the signal to be recorded. See page 18.

OUT: Connect to the digital in of a digital audio component.

•Only files with sampling frequencies of 44.1, 48, 88.2 or 96 kHz can be output.

•Digital audio is only output during normal or EDL playback.

•The receiving component must be able to accept audio in SPDIF (IEC-958-II) format.

•The receiving component must be able to accept a sampling frequency of 44.1, 48, 88.2 or 96 kHz.

DC IN 15V

14. DC IN 15V jack

Plug the supplied AC power pack in this jack. The power supplied is 1.0A at 15V AC.

The PMD671 automatically switches to adapter power if it was running on battery power. If AC power is interrupted by a power outage or unplugging the power pack, the PMD671 automatically switches to battery power.

USB

15. USB port

 

Plug the supplied USB cable in

 

this port and connect the other

 

end to your computer (PC or

 

MAC).

The USB (2.0) connection makes it easy to copy audio files to your computer's hard drive or a CD. This connection can only be made active when the PMD671 is off (neither recording nor during playback).

- 50 -