Marantz pmd671, Portable Solid State Recorder Manual TR, Quick instructions, Quick instructions, How to set or change Auto Mark, How to set or change Manual TR

How to set or change Auto Mark

Quick instructions
Press & hold	MENU/STORE 2 sec		....... Preset
Double Click ENTER		..................	RecFormat
Press F.FWD/+	until	.....................	Auto Mark
Press ENTER	.....................................		Off/On
Press F.FWD/+	........................ toggle Off/On
Press ENTER	...............................		Auto Mark
Press MENU/STORE ....................			store & exit

1.From stop, press and hold the

MENU/STORE

button for about 2 seconds.

2.With Preset flashing in the display double

click the ENTER button .

3.Press and re- lease the F.FWD/

+ button until

Auto Mark is displayed.

4.With Auto Mark flashing. press and release the ENTER button .

Auto Mark menu choice is flashing.

5.Press and re- lease the F.FWD/

+ button to toggle between On and Off.

6.When correct, press and re- lease the ENTER

button .

The display returns to Auto Mark flashing.

You can:

•Press and release the F.FWD/+ button or the -/

F.REV button to tab to another menu choice, or

•Press and release the MENU/STORE button to write the menu changes and return to stop mode, or

•Press and release the CANCEL button to cancel all menu changes and return to stop mode.

Manual TR

When Manual track incrementing is on, slide and release the REC switch during recording to increment the track. A new track is created at that point. There is no break in recording. When Manual track incrementing is off, sliding and releasing REC switch during recording does nothing.

Default setting is On.

How to set or change Manual TR

Quick instructions
Press & hold	MENU/STORE 2 sec		....... Preset
Double Click ENTER		..................	RecFormat
Press F.FWD/+	until	....................	Manual TR
Press ENTER	.....................................		Off/On
Press F.FWD/+	........................ toggle Off/On
Press ENTER	..............................		Manual TR
Press MENU/STORE ....................			store & exit

1.From stop, press and hold the

MENU/STORE

button for about 2 seconds.

2.With Preset flashing in the display, double

click the ENTER button .

3.Press and release the F.FWD/+ button until Manual TR is

displayed.

4.With Manual TR flashing, press and release the ENTER button

. Manual TR menu choice is flashing.

5.Press and release the F.FWD/+

button to

toggle between On and Off.

6.When correct, press and release the ENTER button

.

The display returns to Manual TR flashing.

- 38 -