Marantz pmd671, Portable Solid State Recorder S.Monitor, Quick instructions, Quick instructions, How to set or change Auto Cue, How to set or change S.Monitor

How to set or change Auto Cue

Quick instructions
Press & hold	MENU/STORE 2 sec		....... Preset
Double Click ENTER		..................	RecFormat
Press F.FWD/+	until	......................	Auto Cue
Press ENTER	.....................................		Off/On
Press F.FWD/+	........................ toggle Off/On
Press ENTER	............................ milliseconds
Press F.FWD/+	.................... tab milliseconds
Press ENTER	..................................		decibels
Press F.FWD/+	..........................		tab decibels
Press ENTER	................................		Auto Cue
Press MENU/STORE ....................			store & exit

1.From stop, press and hold the

MENU/

STORE button for about 2 seconds.

2.With Preset flashing in the display, double

click the ENTER button .

3.Press and release the F.FWD/+ button until Auto Cue is

displayed.-dB

4.	With Auto Cue
	flashing, press		-dB
	and release the
	ENTER button		.
	On/Off menu choice is flashing.
5. Press and re-
	lease the F.FWD/		-dB
	+ button	to
	toggle between On and Off.
6.	When correct,
	press and		-dB
	release the
	ENTER button
	. Milliseconds choice flashing.

Note

If you don't want to change the Milliseconds or dB settings

press and release the ENTER button several times to tab to Auto Cue flashing.

7. Press and
release the	-dB
F.FWD/+ button

to tab

through milliseconds.

8. When correct, press and release the ENTER

button .

Decibel choice-dBflashing.

9. Press and
release the	-dB
F.FWD/+ button
to tab through decibel choices.

10. When correct,

press and re--dBlease the EN-

TER button .

The display returns to Auto Cue flashing.

You can:

•Press and release the F.FWD/+ button or the -/

F.REV button to tab to another menu choice, or

•Press and release the MENU/STORE button to write the menu changes and return to stop mode, or

•Press and release the CANCEL button to cancel all menu changes and return to stop mode.

S.Monitor

Stop Monitor lets you monitor the source signal when in stop as well as during record. The source signal is available at the PHONES jack or Internal Speaker.

Default setting is Off.

How to set or change S.Monitor

Quick instructions
Press & hold	MENU/STORE 2 sec		....... Preset
Double Click ENTER		..................	RecFormat
Press F.FWD/+	until	......................	S.Monitor
Press ENTER	.....................................		Off/On
Press F.FWD/+	........................ toggle Off/On
Press ENTER	................................		S.Monitor
Press MENU/STORE ....................			store & exit

1.From stop, press and hold the MENU/ STORE button

for about 2 seconds.

- 42 -