Marantz SR6001 manual English, Video Setup, 4-1VIDEO CONVERT

4 VIDEO SETUP

Video settings are made as follows.

1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3/4 cursor buttons and press

the ENTER button.

		4 . VIDEO	SETUP
	VIDEO CONVERT
TV . AUTO				:DISABLE
OSD		INFO		:ENABLE
I/P		CONVERT		:ENABLE
RETURN			NEXT EXIT

2. Select the desired menu with the 3/4 cursor buttons and press the ENTER button.

•VIDEO CONVERT “4-1 VIDEO CONVERT”

•TV-AUTO

Select the TV AUTO ON/OFF function to enable or disable with the 1 or 2 cursor buttons. (refer to page 50)

•OSD INFO

Select the OSD information function to “ENABLE” or “DISABLE” with the 1 or 2 cursor buttons.

If you select “ENABLE”, the SR6001 will display the status of the feature (Volume up/down, input select, etc..) on the monitor. If you do not desire this information, select “DISABLE”.

Note:

•OSD information is not output to Monitor Output of HDMI and Component Video. However, OSD information is output if the Video Convert function is used to output Video or S-Video video signals to Monitor Out of HDMI and Component Video.

For details, refer to“VIDEO CONVERT”on page 45.

•IP CONVERT

Select the IP CONVERT ON/OFF function to enable or disable with the 1 or 2 cursor buttons. (refer to page 45)

After you complete this portion of the setup, move cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the ENTER button.

4-1 VIDEO CONVERT

The SR6001 is equipped to convert video signals for monitor output.

This section explains how to set up conversion for each type of video input.

1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3 / 4 cursor buttons and press the ENTER button.

2. Select “VIDEO CONVERT” with the 3 / 4 cursor buttons and press the ENTER button.

VIDEO CONVERT

TV	:		ANA&HDMI
DVD	:		ANA&HDMI
VCR	:		ANA&HDMI
DSS	:		ANA&HDMI
AUX1	:		ANA&HDMI
TAPE	:		ANA&HDMI
CD/R	:		ANA&HDMI
AUX2	:		ANA&HDMI
RETURN		BACK		EXIT

3. Select “FUNCTION” with the 3 / 4 cursor buttons and set the video conversion mode with the 1 / 2 cursor buttons

ANA&HDMI:

This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). Furthermore, it up-converts from analog video signal to HDMI. (It cannot down- convert from HDMI digital video signals to analog video signals.)

ANA ONLY:

This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). It does not up-convert to HDMI.

OFF:

This mode turns off all conversion features.

Note:

• For details on video convert feature, see page 45.

ENGLISH

39