ENGLISH
5PREFERENCE
•MULTI ROOM SETUP :
•DC TRIGGER SETUP :
1. Select “5. PREFERENCE” from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button.
5 . PREFERENCE
MULTI ROOM SETUP
DC TRIGGER SETUP
STANDBY : NORMAL
BILINGUAL : MAIN
HDMI AUDIO: ENABLE
RETURN | NEXT EXIT |
2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button.
STAND BY:
When this is set to “ECONOMY”, you can reduce the power consumption when the unit is in the Standby mode. When “ECONOMY” is selected, “TV AUTO” and
BILINGUAL:
In the Bilingual mode, Dolby Digital and DTS output is set to either “MAIN” or “SUB”. Select “BILINGUAL” with the 1 or 2 cursor buttons, then select MAIN ↔ SUB ↔ MAIN+SUB with the 1 or 2 cursor buttons.
HDMI AUDIO:
This setting determines whether to play back audio input to the HDMI jacks through the SR6001 or output it through the receiver to a TV or projector. ENABLE: The audio input to the HDMI jacks can be played back by this receiver.
In such case, audio signals are not output to the TV or projector.
THROUGH: The audio input to the HDMI jacks is not output from the speaker terminals of the SR6001. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc.
After you complete this portion of the setup, move the cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the ENTER button.
5 . PREFERENCE
MULTI ROOM SETUP
DC TRIGGER SETUP
STANDBY : NORMAL
BILINGUAL : MAIN
HDMI AUDIO: ENABLE
|
| RETURN | NEXT EXIT |
|
| |
DC | TRIGGER SETUP | MULTI | ROOM SETUP | |||
DC TRIG: DISABLE |
|
|
|
| ||
|
|
|
| AUDIO | : DVD |
|
TV | : | TAPE | : | SLEEP | :OFF |
|
DVD | : | CD/R | : | MONO/ST:STEREO | ||
VCR | : | AUX2 | : |
|
|
|
DSS | : | TUNER | : | MULT:OFF | MSPK: | |
AUX1 | : | 7 . 1CH | : | VOL :VARI | VOL : | |
|
|
|
| LEV : - 90dB LEV : | ||
RETURN |
| NEXT | EXIT | RETURN | BACK | EXIT |
40
