Marantz SR6001 manual English, The Remote Control From Multi Room, General, Tuner

OPERATION OF THE MULTI ROOM OUTPUTS WITH

THE REMOTE CONTROL FROM MULTI ROOM

Multi Room output can be operated from a room where the receiver is not installed. This requires a separately sold IR receiver. (For connections, see page 24.)

0	+10
CH/ CAT	VOLUME			BASS	TREBLE
SPKR A/B	MUTE	2.	TV	DVD	VCR	DSS
MULTI/ CAT	M-SPKR		TUNER	CD	CDR	MD	1.
INFO	MENU		TAPE	AUX1	AUX2	AMP
		1.		REMOTE CONTROLLER

RC5001SR

ENTER

T.TONE

1. Press MULTI on the multi room remote control from the MULTI ROOM.

(Press the AMP button first to enter the AMP mode then press the MULTI button.)

This operations will put the SR6001 into multi room mode and “MULTI” will be illuminated on the display.

2. Press the VOLUME+ or VOLUME− button on the multi room remote control to set the desired volume.

3. In multi room mode, the multi room remote control can be used in the multiroom to operate the following functions.

General:

Controlling volume level, sleep timer, and muting. SeIecting input audio and video source.

Tuner:

Selecting band, controlling preset channel up and down, tuning up and down direct frequency call.

Notes for the Multi Room System

•The MULTI ROOM OUT (MULTI OUT/MULTI SPEAKER) has analog outputs.

This does not support digital input signals.

•If the Tuner (FM or AM) is active in the main room, you can not control any function of the tuner.In this case, You must listen to the same station as the main room.

•When the component with RC-5 bus is connected to the MULTI RC IN jack(see page 24), Multiroom can be operated using the RC codes for the main room. The remote control units of other Marantz products can also be used to control multiroom.

ENGLISH

61