ENGLISH
INTRODUCTION
Thank you for purchasing the Marantz SR6001 Surround receiver.
This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR6001.
As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
XM Satellite Radio Ready
The XM name and related logos are registered trademarks of XM Satellite Radio Inc.
PRECAUTIONS
DO NOT LOCATE IN THE FOLLOWING PLACES
To ensure
•Exposed to direct sunlight.
•Near sources of heat such as heaters.
•In highly humid or poorly ventilated environments.
•Dusty.
•Subjected to mechanical vibrations.
•On wobbly, inclined or otherwise unstable surfaces.
•In locations such as in cramped audio racks where radiated heat is blocked.To ensure proper heat radiation, ensure the below clearance from walls and other equipment.
| Above |
| 8 inchs (20 cm) |
| or more |
Left | Right |
8 inchs (20 cm) | 8 inchs (20 cm) |
or more | or more |
Rear
8 inchs (20 cm)
or more
DESCRIPTION
DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality discrete multichannel digital sound to both movies and music.
DTS is a multichannel sound system designed to create full range digital sound reproduction.
The no compromise DTS digital process sets the standard of quality for cinema sound by delivering an exact copy of the studio master recordings to neighborhood and home theaters.
Now, every moviegoer can hear the sound exactly as the moviemaker intended.
DTS can be enjoyed in the home for either movies or music on of DVD’s, LD’s, and CD’s.
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
The advantages of discrete multichannel systems over matrix are well known.
But even in homes equipped for discrete multichannel, there remains a need for
The typical matrix decoder of today derives a center channel and a mono surround channel from two- channel matrix stereo material. It is better than a simple matrix in that it includes steering logic to improve separation, but because of its mono, band- limited surround it can be disappointing to users accustomed to discrete multichannel.
Neo:6 offers several important improvements as follow,
•Neo:6 provides up to six
•Neo:6 technology allows various sound elements within a channel or channels to be steered separately, and in a way which follows naturally from the original presentation.
•Neo:6 offers a music mode to expand stereo nonmatrix recordings into the five- or
In addition to the 5.1 surround channels (FL, FR, C, SL, SR and LFE),
“DTS”,
The stereo CD is a
44.1kHz. Professional audio has been 20- or 24- bit for some time, and there is increasing interest in higher sampling rates both for recording and for delivery into the home. Greater bit depths provide extended dynamic range. Higher sampling rates allow wider frequency response and the use of anti- alias and reconstruction filters with more favorable aural characteristics.
DTS 96/24 allows for 5.1channel sound tracks to be encoded at a rate of 96kHz/24bits on
When
2