Marantz VP-12S2 manual Connection, When making connections be sure to, When pulling out a cable

ENGLISH

CONNECTION

❖When making connections be sure to:

•Turn off all equipment before making any connections.

•Use the proper cables for each connection.

•Insert the plug properly. Any plugs that are not fully inserted often generate a noise.

❖When pulling out a cable:

•Be sure to grab the plug, not the cable itself.

Connection with AC Power Supply

Connect the supplied AC power cord into the AC IN socket of the projector.

The STANDBY indicator lights up and the projector goes into the standby mode.

Note : Make sure the AC power cord is firmly connected into the AC IN socket.

Connection with Video Equipments

You can connect this projector to a VCR, DVD player and other video equipment.

Connecting a video source using S-VIDEO IN and VIDEO IN terminals.

1.Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video cable to the VIDEO IN terminal on the projector.

2.Connect the other end of the S-video cable or the video cable to the S-video output terminal or video output terminal of the video source.

Connecting with DVD player using COMPONENT VIDEO IN terminal

1.Connect each RCA connector of a component cable to the corresponding RCA terminals on the projector.

2.Connect the other end of the cable to the corresponding terminals on a DVD player.

Component cable

(commercially available)

COMPONENT VIDEO OUT

STANDBY FL OFF

DVD

S-video cable (commercially available)

S-VIDEO OUT

VIDEO OUT

Video cable

(commercially available)

VCR

8