Marantz VP-12S2 Connection with a HD-Video, Satellite, Cable Tuner or PC, Advanced Connection

Connection with a HD-Video, Satellite, Cable Tuner or PC

You can connect this projector to HD-Video /PC using RGB IN port, or Satellite /Cable Tuner /PC using DVI-D IN port.

1.Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to the DVI-D IN port on the projector.

2.Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal computer.

Note : When projecting a video image from a device connected to the DVI-D terminal, follow the procedure below.

1.Turn on power of this unit. (☞ P.16)

2.Set the input video source to AUX (DVI-D input). (☞ P.16)

3.Turn on power of the device connected to the DVI-D terminal of the unit (i.e. DVD player). If the procedure above is not followed, projected image may corrupt.

For the details of the DVI-D terminal on the device connected with the unit, see the instruction manual of the device.

RGB (D-Sub monitor) cable
(commercially available)	RGB OUT
	or
	DVI-D out
	HD-Video / Satellite
	/ Cable Tuner
	Monitor output
	RGB OUT
	or
	DVI-D out
DVI-D cable
(commercially available)	IBM VGA or
	Compatible PC

Advanced Connection

You can control total home theater system using PC or Marantz receiver equipment.

For installing below system, consult with Marantz authorized dealer.

RS-232C cable

(straight type, commercially available)

RS-232C

External Controller

Screen

35mm Mini Plug (Mono)

(commercially available)

(commercially available)

REMOTE CONTROL IN

REMOTE CONTROL OUT

Control Adapter cable

(supplied)

Receiver equipment

ENGLISH

9