–When theLampl p lifeLifeWarningbecomes100lessHoursthan 100 hours and the unit is still on, the remaining lamp life is displayed on the screen automatically.
–When the lamp life becomes less than 5 hours, the remaining lamp life is displayed on the screen .
Warning | |
LampWarningLife 5 Hours | |
light up in red.LampLife0Hours | |
To clear the warning, p | ss the MENU key. |
– When the lamp life has | xpired (Lamp Life 0 HOURS), the unit will be immediately turned off, and the WARNING indicator will |
❖ Initialize the Lamp Life
If the lamp is replaced to new one, follow this procedure to reset (initialize) the lamp life.
Refer to "Replacing Lamp Unit". (☞ P.30)
1. | Connect the AC po er cord after replacing lamp unit. (☞ P.8) |
2. | Press the POWER ON key on the remote controller or the POWER key on the projector. |
| The followingYesmessageNewLampppears?Nof r 120 seconds. |
3.Select “Yes”, using the 1 / 2 keys.
4.Press the ENTER key . The lamp life indicator is now initialized.
3. | 2. |
| 3. |
| 4. |
4. |
|
2. |
|
ENGLISH
29
