Setting the Memory Menu, Lamp Life | Marantz VP-12S2 specification

ENGLISH

Memory

This unit has 4 picture modes, Theater, Standard, Dynamic, User, for your choice. You can choose one with the direction buttons on the unit or on the remote.

•Theater : This mode is designed for high fidelity black appearance and is good for movie pictures.

•Standard : This mode is good for normal pictures.

•Dynamic : This mode is good for visually dynamic pictures.

•User : This mode allows you to adjust your favorite gamma curve.

NotePicture: It isAdjustpossibleModeto downloadStandardthe software for making the gamma curve from our web.

Also, eachSettingmode has 3 User Memories2 and Default. If Default is set, you cannot select "Picture Adjust" and "Display" in the menu.

Display

Config

Trigger2

Memory

–Store memory

From the menu above, select "Memory" and choose one memory mode from 1-3 for either "Theater", "Standard", "Dynamic" or "User" with the remote controller. Picture Adjust menu will be displayed. Adjust the picture and the adjustment settings will be stored in the memory automatically.

❖Setting the Memory Menu

1.Use 3 / 4 key to adjust.

2.Use 1 key to go back to the menu item.

1.	1.
1.
2.	2.

Lamp Life and Replace Lamp

VideoInput	Component-1080i
❖ Lamp Life	Standard2
Memory	Standard2
Display the remaining lamp life by pressing the INFO. key on the remote controller.
CinemaMode	Ato
Aspect	Full
NoiseReduction	0
Lamprigger2Life	921On
TotalHours	3653Hours

Notes:

•The maximum life limit of the lamp is 2,000 hours. Although we care very much about quality, the lamp can rarely breaks down if running time exceeds 1,000 hours. Therefore we recommend to replace the lamp if Lamp Life gets under 1,000 hours. The lamp cannot be used exceeding the maximum life limit.

•This product is checked under strict quality control when it is shipped out form factory.

“Total Hours” in the menu includes the time for this check. So “Total Hours” may not be 0 hours when it is used first time.

28

Image 32

Marantz VP-12S2 manual Setting the Memory Menu, Lamp Life and Replace Lamp, Store memory

Contents

Model VP-12S2 User Guide For the customers in the USA Important Safety Instructions Table of Contents Important Safeguards Replacement Electronics & Software FeaturesOptics Accessories Front and Top View Projection Lens IR sensor Bottom View Rear and Terminals ViewTerminals Remote Controller ¡0THEATER key P.28 Preparing the Remote Controller Remote Controller Operational Range When making connections be sure to When pulling out a cableConnection with AC Power Supply Connection Connection with a HD-Video, Satellite, Cable Tuner or PC Advanced Connection Initial Setting Turning on the PowerZooming and Focusing Adjusting the Image Position Adjusting the Height Detail FocusingReturning the Projector to its Initial Position Counterclockwise Down Keystone Correction Installation Recommended SettingInstalling on a tabletop Mounting on the ceiling Screen Screen Size and Projection Distance inch16 9 Screen Screen Size and Projection Distance m Diagonal Width Height Minimum Maximum Inch Basic Operations Selecting the Input Signal SourceSelecting the Aspect Mode Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Operations Menu Structure Using On-Screen Menu Picture AdjustSetting the Picture Adjust Menu Color Temp. Temperature Delay Fine MenuLuminance Chrominance Sub Control Miscellaneous Setting Setting the Setting Menu Setting the Display Menu Display Configuration Setting the Config Menu Setting the Trigger 2 MenuTrigger On Output DC Setting the Memory Menu MemoryLamp Life and Replace Lamp Lamp Life Initialize the Lamp Life Replacing Lamp Unit MaintenanceHow to replace the Lamp Unit Optional Accessories Cleaning the LensReplacement Parts Troubleshooting Error Mode Specifications On Screen Message Timing chart Glossary Dimensions TopFront Bottom Is a registered trademark