Marantz VP-12S2 manual On Screen Message, Specifications

ON SCREEN MESSAGE

Use the list below to check the message displayed on the screen.

Message	Meaning	Remedy
NO SIGNAL	No input signal.	Properly connect the cables.
REPLACE LAMP!	The lamp has reached the end of its life.	Replace the lamp and reset lamp life.
OUT OF RANGE	Improper signal feed to the projector.	Adjust resolution, V(Hz) : refresh rate of the
		equipment, referring to the Timing Chart.

ENGLISH

SPECIFICATIONS

❖Optical characteristics

Panel	0.8 inch 16:9
	1280 x 720 pixels
	Digital Micromirror DeviceTM
Lamp	Super High Pressure 150W
Lens	f: 26.5 to 30.7 / F: 3.0
Projection size	40 to 250 inches
Light output	700 ANSI LUMEN typical

❖Input/Output

VIDEO IN	RCA x 1
	NTSC-3.58/PAL-4.43/SECAM
	Composite video 1.0Vp-p/75 Ohm
S-VIDEO IN	S-Connector x 1
	NTSC-3.58/PAL-4.43/SECAM
	S-Video
COMPONENT IN	RCA x 3
	Y, CB/PB, CR/PR
RGB/HD IN	D-sub M 15 pin x 1
	Analog RGB
	HD:1080i, 720p, 480p
DVI-D IN	DVI-D 24pin x 1
	T.M.D.S compliant (single link only)
	☞ P.34

REMOTE CONTROLLER IN

Mini jack type x 1

REMOTE CONTROLLER OUT

Mini jack type x 1

AC IN	3 Prong Grounding Type
TRIG.1 OUT, TRIG.2 OUT
	Mini Jack x 2
	Output: DC12V or 0V
RS232C	RS232C receptacle plug x 1

❖ General

Power requirement	AC 100-120V / 220-240V, 50/60 Hz
Power consumption	< 250 W
Standby consumption	< 3.3 W
Chassis isolation	Class-1
Safety	UL6500
	CSA E60065
	EN60950
EMC	FCC Part-15 Class-B
	EN55022 Class-B
Dimensions	15 15/16(W) x 18 9/16(D) x 6 1/8(H) inch
	404.5(W) x 471(D) x 158(H) mm
Net weight	13 kg
Operating Temperature	5 to 35 °C
Operating humidity	30 to 85%
Storage Temperature	– 20 to 60 °C
Storage humidity	30 to 85%

❖Accessories

•Lens cap x 1

•Remote controller x 1

•Batteries x 2

•AC power code (only for 125V) x 1

•User Guide x 1

•Control Adapter cable (Mini jack to RCA) x 1

•Warranty Card (1 copy each for USA, CANADA)

Specifications may be subjected to change without any prior notice.

33