How do I send a Check-in Report?

After disarming the system, access the User Menu and press the COMMAND + 7 keys. Then enter your user code to send a Check-in Report.

What is the Zone Activity Check feature?

It allows you to monitor a person for non-activity, such as detecting when a person living alone has not tripped a disarmed zone within a programmed period of time.

How can I enable or disable the Zone Activity Check?

You can select YES or NO at the ACTIVITY CHECK? display to enable or disable the Zone Activity Check feature.

User Check-in, Zone Activity Check

User Check-in

User Code Level: Master or Standard

Function: This feature allows you to monitor the arrival of children from school or employees to work by having a special Check-in Report sent to your alphanumeric or numeric pager. Your system must be programmed for the Pager Direct™ option. The Appendix section of this guide contains Quick Reference cards for your wallet or purse.

Sending a Check-in Report:

1.After disarming the system, access the User Menu.

You may also press the COMMAND + 7 and then enter your user code to send a Check-in Report.

2.At the USER CHECKIN? display, press any Select key. The keypad displays USER CHECKIN: 22 ( 22 = user number).

3.The panel sends the Check-in Report containing your account number and user number to the pager.

Zone Activity Check

User Code Level: Master or Standard

Your security system may be programmed for the Zone Activity Check feature to monitor a person for non-activity. This could be used for a person living alone to detect when they have not tripped a disarmed zone within a programmed period of time. This feature can be programmed for you at any time.

Function: This option allows you to enable or disable the Zone Activity Check which monitors your system for no zone activity. When the programmed time period is exceeded because no activity is detected, your keypads will sound a steady tone and display PRESS ANY KEY. Pressing any key on the keypad restarts the no activity programmed time period and prevents your system from sending a “User Activity Not Detected” report to the central station.

Note: The Zone Activity Check is disabled when a schedule is entered to allow for sleeping hours and is automatically enabled when an area is armed or disarmed.

Selecting Zone Activity Check:

1.At the ACTIVITY CHECK? display, press any Select key. The keypad displays ENABLE? YES NO. The default is YES.

2.When NO is selected, the keypad displays CHECK DISABLED for four seconds and then sends the Activity Check Disabled message to the central station.

3.When YES is selected, the keypad displays CHECK ENABLED for four seconds and then sends the Activity Check Enabled message to the central station.

14	XR20 User Menu

Master Lock XR20 manual User Check-in, Zone Activity Check, Sending a Check-inReport

Models: XR20