User Codes
User Code Level: Master only.
Function: Allows you to add or delete a user from the system or change their user code or authority level.
There are three characteristics associated with each user code:
10 | 3812 | Master |
User Number | User Code | Authority Level |
User Number - Your system supports 32 users. Each user is numbered from 1 to 32. This number identifies them to the system and is transmitted to the central station (if your system is monitored) when they arm or disarm the system.
User Code - Users also have a
Users enter only their own user code when operating the system.
Authority Level - The user is also assigned a level of authority (Master or Standard) by the person administrating the system that determines the functions they can access.
The table to the right lists system functions users are allowed to access based on the authority level assigned to their codes at the time they are added to the system.
User Code Authority Levels
System Options | Standard | Master |
Sensor Reset | ✔ | ✔ |
Outputs On/Off | ✔ | ✔ |
Bypass Zones | ✔ | ✔ |
Zone Monitor | ✔ | ✔ |
System Test | ✔ | ✔ |
Arm and Disarm | ✔ | ✔ |
Display Events | ✔ | ✔ |
Schedules |
| ✔ |
Date and Time |
| ✔ |
User Codes |
| ✔ |
Adding User codes
1.Access the User Menu. Press the COMMAND key until USER CODES? displays.
2.Press any Select key. The keypad displays ADD DEL CHG.
3.Press the Select key under ADD to add a new user code. (You must have a Master user level to add a user.)
4.At the USER NUMBER: - prompt, enter a user number and press COMMAND.
5.The displays changes to CODE NO:. Enter the user code and press COMMAND.
18 | XR20 User Menu |
