Introduction
About Your Security System
Your Security Command system has been designed with your safety and comfort in mind. It uses the latest in computer technology to create the most user friendly security and fire system on the market today.
The system combines ease of use with a simple to understand Security Command keypad display to offer the full range of features requested by today’s security system owners. Security Command can protect both the interior and perimeter of your home or business while you are away or just the perimeter when you are inside giving you a wall of security and peace of mind.
You can turn portions of your protection on or off at any time by pressing a few buttons. You can add, delete, and change personal user codes at any time or check the status of all protection devices in the system.
Parts of the System
There are two main parts to the Security Command system: the Security Command keypad and the keypad User Menu.
Security Command keypad
This is the device we have placed at certain locations throughout the premises that allows you to turn the system’s protection on and off using your personal user code number.
Keypad User Menu
The keypad also supplies a User Menu containing all of the functions you need to fully operate your system, such as the ability to change a personal user code number.
A Note About False Alarms
One of the most important concerns facing the security industry today is false alarms. The accidental dispatching of police and fire agencies places others in jeopardy by limiting the response capability of those emergency service units.
As part of our commitment to reducing false alarms, we would like to encourage you to read this guide thoroughly. All the information contained here can help you quickly, and comfortably, learn the operation of the Security Command system. If you have any additional questions, or feel that you need more training, please do not hesitate to contact us.
Test Your System Weekly
It is recommended that you test the burglary portion of your system at least once each week. Testing should involve an active test of all doors, windows, and motion detectors connected to your system. If your system also has fire protection, call the service department to find out how this portion of your system should be tested.
Refer to the System Test section of this guide for instructions on testing the burglary portion of your system.
XR20 Introduction | 1 |
