All/Perimeter System Disarming
Disarming: While the system is armed, you can only enter the premises through an entry/exit delay door without causing an alarm. After opening the door, the Security Command keypad sounds a prewarn tone to remind you to disarm the system. You must disarm the system before the prewarn tone expires or an alarm on the door zone will occur.
During the prewarn tone, the keypad displays ENTER CODE:. Enter your user code to disarm the system.
Alarm Display: After disarming, the keypad displays any zones that tripped or any transmission problems that occurred during the armed period. All burglary zones are then disarmed and any bypassed zones are automatically reset.
Disarmed Message: The keypad displays ALL SYSTEM OFF after the system disarms.
Central Station Report: A report of the system disarming can be transmitted to the central station. This is optional and can be programmed for you at any time.
Disarming an All/Perimeter System
1.During the entry delay time, the keypad displays ENTER CODE:. Enter your user code.
2.The keypad displays any zones that went into alarm and any communication problems that occurred during the armed period.
3.The keypad next displays ALL SYSTEM OFF to confirm the system is disarmed.
Disarming During an Alarm
1. While the alarm bell or siren is sounding, enter your user code. The keypad displays DISARM SILENCE.
2.Press the Select key under DISARM to disarm the system and silence the alarm.
The keypad next displays ALL SYSTEM OFF to confirm the system is disarmed.
3.Press the Select key under SILENCE to stop the bell or siren but NOT disarm the system.
If you do not press any Select key, or you press the COMMAND key, the system will automatically disarm and silence the alarm.
Note: If your system is programmed to send an Abort (alarm cancel) report to the central station, selecting DISARM will send this report to the central station. Be sure that you want the alarm message to be cancelled BEFORE deciding to disarm the system. If you do not want to disarm the system and send the abort report, press SILENCE to only turn off the alarm bells.
10 | XR20 Arming and Disarming |
