ELECTRONIC CLOCK
The electronic clock and timer on your Maytag range will flash 12:00 when power is first supplied to the range or if there is a power failure. Once the
has been set, the display will stop flashing.
Tile folloMng pads are found on ),our Maytag electronic clock:
Clock Pad
This pad is used to set tile time of day or to display the
current time when the timer is functioning.
Timer Pad
The timer call be set from 1 minute to 1 hour and 59
minutes (or two hours). It will count do_ by minutes.
Hour Pad
This pad is used to set the hours for the clock mid timer,
Minute Pad
This pad is used to set the minutes for the clock and
timer.
Setting the Clock and Timer
Clock
To set the
1. Press the CLOCK pad.
2. Press and hold the HOUR pall to set the correct hours. To change the time by a single hour, give the
pad a short tap.
3.Press and hold the MINUTE pad to set the correct minutes. To change the time by a single minute, give the pad a short tap.
For example: to set the clock for 8:I5, press and hold the HOUR pad until 3 appears in the hours display. Then press and hold the MINUTE pad until
15 appears in the ininutes display.
Timer
To set the timer:
1.Press the TIMEB pad. 0:59 (or one hour) will appear in the display.
The timer will automatically begin counting down in increments of one minute.
2.To set timer for less time, press tile TIMER pad then press and hold the MINUTE pad until the
desired time appears in the display.
3.To set timer for more than one hour (two hours is the maximum time that can be set), press the
TIMER pad then press the FLOUR pad. l:59 (or two hours) will appear in the display:
Press the MINUTE pad nntil the desired minntes
appear in the display.
When all the time has elapsed, 0:00 will appear in the display and continuous beeps will sound indicating the timer has counted down. Press the CLOCK pad to
cancel the beeps. The current time of day will reappear in the display.
To cancel the timer: press the CLOCK pad and the display" will retm'n _o the current time of day;
PAGE 4
