Maytag CRG8200B, CRG7500A Leveling Legs, Light Replacement, Oven Door, To Replace Oven Light

MAINTENANCE

Electrical Connection

Appliances which require electrical power are equipped with a three-prong grounding plug which must be plugged directly into a properly grounded three-hole 120 volt electrical outlet,

If an ungrounded, two-hole or other type electrical outlet is encountered, it is the

personal responsibility of the appliance owner to have receptacle replaced with a properly grounded three hole electrical outlet. Tile three-prong grounding plug is provided for protection against shock hazards, Do not cut or remove the third grounding prong from the power cord plug.

"/'_'"-_-_x'l

__

_

.....

_

Always disconnect power to appliance--before servicing.

Leveling Legs

Some floors are not level. For proper baking, your range must be level. The leveling legs are

located on each corner of the base of the range. Level the range by turning the legs.

WARNING: To reduce the_skofaeeidental

bracket slot.

Light Replacement

Before replacing the light bulb, disconnect the power to the range. Be sure the bulb is cool. Do not touch a hot bulb with a clamp cloth as the bulb may break.

To Replace Oven Light

Very carefully unscrew the lens cover with a dry

potholder to prevent possible harm to hands,

potholder. Replace with a 40 watt appliance bulb. Reconnect the power to the range and reset the clock to the current time-of-day.

then very carefully remove the bulb with a dry

0

Oven Door

Do not place excessive weight on an open oven door or stand on an open oven door as, in some cases, it could damage the door, cause the range to tip over and possibly injure the user.

When opening the oven door, allow steam and

hot air to escape before reaching into the oven to check, add or remove food.

PAGE 19