Maytag CRG9700C, CRG7700B, CRG9800C Before You Call For Service, Oven light does not operate

BEFORE YOU CALL FOR SERVICE

Check these points if...

Part or all of your gas range does not operate

•Is the range plug loose or disconnected from the electrical outlet (if not wired direct to the electrical

snpply)?

•Are any house fuses blown or circuit breakers tripped?

•Has a range fuse bloval (Canadian ranges only')?

•lids the power supply to the home been interrupted?

•Are the oven controls properly' set?

•Was the door left in the locked position fellowing a self-clean cycle (select models)?

•Is the oven set for a programmed oven operation?

Surface elements fail to turn on or heat the food properly"

•Is the range plug loose or disconnected from the electrical outlet (if not wired direct to the electrical

supply)?

•Has a range fuse blown (Canadian ranges only)?

•Were appropriate pans used (See "Cooking Made Simple" booklet)?

•Are the surface burner controls properly set?

Food not baking correctly"

•Are the oven racks properly placed for baking (See "Cooking Made Simple" booklet)?

•Have you used aluminum foil correctly?

•Was the oven preheated as recommended?

•Are the controls for bake operations properly set?

•Is there 1 to 2 inches of space between pans and the oven wails? Are the range and oven racks level?

•Was good cookware/bakeware of the proper size used?

•Are you using a tested recipe from a reliable source? The oven thermostat on your new range may be more accurate than the one on your old range,

•Was the oven vent covered or blocked on the range surface?

Food does not broil properly

•Are the controls for broiling set properly? (See Broiling section, page 10.)

•Was the proper rack position used? (See Broiling section, page 10.)

•Was the broiler pan received with the range used?

•Was aluminum foil used on the broiler pan insert, blocking the slits for fat drainage?

Oven light does not operate

•Is the bulb loose or burned out?

•Is the light switch in the On position?

Oven will not self-clean (select models)

•Is the self-clean control set properly? (See Self-Clean instructions, pages 12-I3.)

•Is the oven set for a programmed oven operation?

Oven door won't lock (select models)

•Are the proper controls set for the self-clean cycle? (See Self-Clean instructions, pages t2-13.)

Oven door will not unlock (select models)

•Has the self-clean cycle been _nished for at least one hour?

"F" plus a number appears in the display (select models)

•These are fault codes. If a fault code appears in the display" and a continuous beep sounds, press the CANCEL pad. If the fanlt eode reappears, disconneet power to the range and call a qualified service technician.

Fan sound (select models)

•A fan will automatically turn on when the oven is operated to cool the clock controls. This is normal. It

may continue to run even after the oven is turned off

For further assistmtce contact your Maytag dealer or call Maytag Customer Service:

U.S.1-800-688-9900

CANADA 1-800-688-2002

PAGE 17