Maytag CRG9700C ClockPad, Setting the Clock and Timer, Cook Time/Oven Stop Pads, Broil Pad

ClockPad

Use this pad to set the time-of-day clock. For instruc- tions to do this, see below.

You may also press this pad to recall the cmxent time of day. For example, if the timer is counting down in the display, press the CLOCK pad to return the current

time to the display. The timer will continue to count down and a signal will sound when the time expires.

Cook Time/Oven Stop Pads

These pads are used to program the oven to start and stop automatically; either immediately or at a later time.

For detailed information on using Programmed Oven Operations, see pages 10-11.

Self Clean Pad (select models)

This pad is pressed to set the oven for a self-clean cycle, See pages 12-13 for detailed information on the self-

clean feature.

Broil Pad

Use this pad to select broil. Two heat selections are

available for broiling--Hi and Lo. See page 10 for more broiling information.

Oven Temp Pad

The oven temperature is set by pressing this pad and

the • or • pad. Additional baking and roasting

information can be found on pages 8-9.

Setting the Clock and Timer

Clock

To set the time-of-day clock:

1.Press the CLOCK pad once. The words "Set Time" will flash in the display.

2.Set the correct time ofdaynsingthe • and • pads.

•To change the time by one minute, press either pad once.

•To change the time in increments of 10 minutes, press and hold either pad.

When the power is first supplied to the range or if there

has been a power failure, the display will flash. Follow

above instructions to set the clock. The clock time cannot be changed when the oven is set tbr a cook or

self-clean (select models) operation. Cancel the operation to set the clock.

Press the CLOCK pad to recall the time of day when another function is displayed.

Timer

To set the timer:

1.Press the TIMER pad once. The words "Set Timer" will flash in the display.

2. Set the desired time using the • and • pads.

•Press either pad once to change the time by 1 minute (if the Timer is set fbr up to 1 hour), 5 minutes (if the Timer is set for over 1 hour), or 10 minutes (if the Timer is set fbr over 2 hours).

•Press and hold either pad to change the time in 5 minute or 10 minute increments, depending npon the time set in the display.

The TIMER can be set from 1 minute (0HR:01) up to 9 hours and 50 minutes (9 HR:50).

The timing operation will start automatically. Colons will flash in the display to indicate a timing operation. One long continuous beep will signal the end of the timing operation and "End" will briefly appear in the display: The time of day will automatically reappear in the display. The TIMER pad does not control the oven.

To cancel: Press the TIMER pad and hold for 3 seconds. The time of day will reappear after a slight delay.

PAGE 5