Maytag CHG9800B Surface Cooking, Panel Light select models, Sealed Burners, Pilotless Ignition

SURFACE COOKING

Panel Light (select models)

The panel light is turned on by pushing tile rocker switch on the control panel and holding it in until the

fluorescent light comes on. It may be tnrned off by pushing the other side of the switeh,

Sealed Burners

The sealed burners of your range are secured to the cooktop and are not designed to be removed.

Since the burners are sealed into the eooktop, boilovers or spills won't seep underneath the oooktop.

Your range features two special Power Burners

located in the left rear and right front positions. (NOTE: Model CHG9800 features one Power Burner

located in the front posiCton.) These offbr higher speed cooking that can be used to quickly bring water to a boil and for large-quantity cooking.

The eooktop on gas ranges with sealed burners is designed with two contoured wells which contain spills. Unlike a range with standard gas burners, this eooktop

does not lift-up nor is it removable. To prevent damage to the range, do not attempt to lift the cooktop for any reason.

POWERBURNER

L__]

	Pilotless Ignition
	prior to supplying gas to the range.
	Your range is equipped with a pilotless ignition system
i	which eliminates the need for a constant	standing pilot
	Be snre all snrl;ace controls are set in the	OFF position
	light. The spark ignitor is located at the back-side of
	each burner. When cleaning around the snrface burner,
	use care. If a cleaning cloth should catch the ignitor, it
Burner Grates	could damage it. This will prevent the bunler from
	lighting.

When reinstalling the grates, place the indented sides together

so the straight sides are at the

front and rear. Although the burner grates are durable, they will gradually lose their shine due

__lgnitor

_"#'/_'_REAR VIEW OF SEALED BURNER

to high temperatures. <_

PAGE 6