Oven Light
CAUTIONS:
•Disconnect power to range before replacing light bulb.
•Use a dry potholder to prevent pos- sible harm to hands when replacing bulb.
•Be sure bulb is cool before touching.
•Do not touch hot bulb with a damp cloth as this may cause the bulb to break.
To replace:
1.When oven is cool, hold bulb cover in place, then slide wire retainer off cover. NOTE: Bulb cover will fall if not held in place while removing wire retainer.
2.Remove bulb cover and light bulb.
3.Replace with a 40 watt appliance bulb.
4.Replace bulb cover and secure with wire retainer.
5.Reconnect power to range. Reset clock.
BULB COVER
WIRE
RETAINER
Storage Drawer
The storage drawer at the bottom of the range is safe and convenient for storing metal and glass cookware. DO NOT store plastic, paperware, food or flammable ma- terial in this drawer. Remove drawer to clean under range.
To remove: Empty drawer then pull out to the first stop position. Lift up front of drawer and pull to the second stop posi- tion. Grasp sides and lift up and out to remove drawer.
To replace: Fit the ends of the drawer glides onto the rails. Lift up drawer front and gently push in to first stop position. Lift up and continue to slide drawer to the closed position.
Electrical
Connection
Appliances which require electrical power are equipped with a three- prong grounding plug which must be plugged
directly into a properly
Always disconnect power to appliance before servicing.
The
NOT CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded,
Leveling Legs
CAUTION:
•Be sure the
The range should be leveled when installed. If the range is not level, turn the plastic level- inglegs,locatedateachcor- ner of the range, until
range is level.
LEVELING LEG
Removal of Gas Appliance
Gas appliance connectors used to con- nect this appliance to the gas supply are not designed for continuous movement. Onceinstalled,DONOTrepeatedlymove this gas appliance for cleaning or to relo- cate. If this appliance has to be moved and/or removed for servicing, follow the procedure described in the installation instructions. For information, contact Maytag Customer Service at
To prevent range from accidentally tip- ping, range must be secured to the floor by sliding rear leveling leg into the anti- tip bracket.
Oven Bottom
Protect oven bottom against |
| |||
spillovers, espe- |
|
| ||
cially | acidic | or | 2 | 1 |
sugary spills, | as |
| ||
|
| |||
they may discolor |
|
| ||
the | porcelain |
|
| |
enamel. Use the |
| 3 | ||
|
|
|
| |
correct pan size to |
|
| ||
avoid spillovers and boilovers. |
|
The oven bottom may be removed for easier cleaning.
To remove: When cool, remove the oven racks. Slide the two catches, located at each rear corner of the oven bottom, toward the front of the oven.
Lift the rear edge of the oven bottom slightly, then slide it back until the front edge of the oven bottom clears the oven front frame. Remove oven bottom from oven.
To replace: Fit the front edge of the oven bottom into the oven front frame. Lower the rear of the oven bottom and slide the two catches back to lock the oven bottom in place.
16