McIntosh MDLP2 Connector and Cable Information, Power Control Connectors, Data Port Connectors

Connector and Cable Information

Power Control Connectors

The MDLP2 Power Control Output Jacks send and Power Control Input Jacks receive Power On/Off Signals when connected to McIntosh and other non-

McIntosh Components. A 1/8 inch
	Power
stereo mini phone plug is used for con-	Control
nection to the Power Control Input and	N/C
Outputs on the MDLP2.	Ground

Note: The Data and Power Control Connecting Cable is avail- able from the McIntosh Parts Department:

Data and Power Control Cable Part No. 170-202

Six foot, shielded 2 conductor, with 1/8 inch stereo mini phone plugs on each end.

Data Port Connectors

The MDLP2 Data In Port receives Remote Control Signals from other McIntosh Components. A 1/8 inch stereo mini phone plug is used for connection. The IR Ports also use a 1/8 inch stereo mini phone plug and allow the connection of other brand IR Receivers to the MDLP2.

Data

Signal

N/C

Data

Ground

IR Data

Control

N/C

Ground

RS232 DB9 Connector Pin Layout

1. N/C		6. N/C
2. Data Out (TXD)		7. N/C
3.	Data In (RXD)	8. N/C
4. N/C		9. N/C
5.	Gnd.

6