System Settings
Device Buttons
1.Select one of the twelve Device But- tons you wish to store macro functions with the cursor on DEVICE BUTTON.
2.Move the cursor to COMMON BUT- TON and select again either the same or another device button whose func- tional buttons you wish to store in the device Macro
3.Store the commands you selected to the Macro
Favorite Channel Button
1.Select the device you wish to program Favorite Channels with the cursor on
COMMON BUTTON.
2.Select one of the Favorite Channel
3.Store the commands you selected in the Favorite channel button by press- ing Channel UP button. To cancel the macro commands, press CH (DOWN). Once you complete the macro pro- gramming and wish to exit, press both the MAIN and PAGE buttons simulta- neously. This will take you to the set- ting mode. Move the cursor to 8. TO
EXIT in setting mode and press the cursor down to exit or simply press the MAIN button to exit to main menu.
Note: Pressing the Volume Up button during the macro programming will add a time delay of 0.5 seconds between the commands (e.g. Pressing the Volume Up button twice will cause a pause of 1 second between the commands where the delay was inserted).
Erase Function
To erase a Macro, Device or Favorite Channel Programmed Function that has been stored, press the Channel UP Push- button without entering any commands during the above Programming Modes.
Punch through Functions
You can use audio receiver volume control in a different mode (eg. Audio receiver Volume Up and Volume Down and Mute in Satellite Mode) using a volume Punch- through feature. You can also have four VCR (or DVD) transport buttons, Play, Stop, Fast Forward and Rewind, operate in another mode such as in Satellite, Cable and Audio modes. You can also make CHANNEL
Programming Punch-through
1.Press PUNCH THROUGH in the Touch Screen in 2. SYSTEMS & OP- TIONS Mode.
2.Press VOLUME UP button for Volume Punch Through or press the PLAY but- ton for Transport Punch Through or
17
