McIntosh UR12 manual Device Touch-button, move the cursor to Device Button

in the Device Touch-button, move the cursor to DEVICE BUTTON.

4.Press the functional button or Device Touch-button you wish to erase for three seconds or more and it will flash “ERASED”. Repeat this step for other buttons you wish to erase.

5.Once you completed erasing and wish to exit from this mode, press the MAIN button to go back to the main page of the learning mode. Exit from the Main page by pressing both the MAIN and PAGE buttons simulta- neously.

6.You will be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the cursor or simply press the MAIN button to exit to the main menu.

Erase all the learned commands in a single device

1.Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five sec- onds.

2.Move the cursor to 4. LEARNING with the joystick and then push the joystick down to enter the learning mode.

3.Press the MUTE button to move the cursor to the DEVICE BUTTON and keep the Device Touch-button you wish to erase all the learned com- mands down for five seconds until the Touch-button shows ERASED. This will erase the function taught in the Device Touch-button. If you continue

to press the Device Touch-button for another five seconds, it will erase all the functions in the device.

4.Once you complete the erasing and wish to exit from this mode, press the MAIN button to go back to the main page of the learning mode. Exit from the Main page by pressing the MAIN and PAGE buttons simultaneously.

5.You will be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the cursor or simply press the MAIN button to exit to the main menu.

Erase all the learned commands in all twelve devices

1.Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five sec- onds.

2.Move the cursor to 4. LEARNING with the joystick and then push the joystick down to enter the learning mode.

3.Press both the POWER and STOP but- tons simultaneously for five seconds in the learning mode. The Touch-button will show ERASED after it erased all the learned commands in the remote control.

4.Once you complete the erasing and wish to exit from this mode, press both the MAIN and PAGE buttons simulta- neously.

5.You will be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the cursor or simply

22