McIntosh UR12 manual Setting the Date and Clock, Program Loading, Port on the computer

Setting the Date and Clock

1.Enter the Setting mode by pressing both the MAIN and PAGE Push-but- tons simultaneously for five seconds.

2.Move the cursor on the Touch Screen to 6. SET DATE & CLOCK by using the joystick. Enter this mode by push- ing the joystick down. Refer to figure 19.

3.Press the selection you wish to change from the Touch Screen and change it using the UP and DOWN buttons. Once you complete the settings, store them by pressing the SAVE button.

Figure 19

Program Loading

This program enables you to both up load the program to PC as well as down load from PC using the UR12 Upload Data Cable.

1.Connect the 1/8 inch stereo mini phone plug end of the Upload Data Cable to the jack on the bottom end of the UR12 Remote Control. Refer to figure 21.

2.Connect the DB9 connector end of the Upload Data Cable to the Serial Com

Port on the computer.

1. Enter the Setting mode by pressing both the MAIN and PAGE Push-but- tons simultaneously for five seconds.

2. Move the cursor on the Touch Screen to 7. PROGRAM LOADING by us- ing the joystick. Enter this mode by pushing the joystick down. Refer to

figureOPERATING20UP. LOADPCPROGRAMINTERFCE

LEARNEDUPDOWNDOWNLOADLOADLOADPROGRAM

PROGRAM VERSION_.__

Figure 20

28