button will only show the first brand (in alphabetical order) in that alphabet group.
9.If the first code number assigned to the brand is the right one, it will turn off the component. If it is not the right one or if it is not the right brand name, press the Channel Up button. It will automatically send out a POWER OFF command either from the next code number from the same brand or the code from the next brand. Keep the Channel Up button pressed until it turns off the component. When the component turns off, save the code by pressing the SAVE button on the
Note: It is quite possible that the code number that works with your component may have a different brand name because of the way it was made by its manufacturer. Confirm that it is the right code number for your component by pressing other buttons such as POWER, VOLUME, MUTE and CHANNEL, etc. If any of the buttons do not operate as they should, please repeat from Step 5.
10.Continue to program other compo- nents by repeating from Step 5.
11.Once you have completed program- ming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simul- taneously.
12.You will be in the setting mode. Move the cursor to 8. TO EXIT and press the cursor down or simply press the
MAIN button to exit to the main menu.
Learning Method
1.Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five sec- onds.
Note: Any of the
2.Move the cursor to 4. LEARNING with the joystick and then push the joystick down to enter the learning mode. Refer to figure 13.
Figure 13
3.If you wish to teach any of the func- tional buttons in the device, keep the cursor at COMMON BUTTON and select the device that you wish to en- ter. If you wish to teach the twelve de- vice buttons shown on the
20
