Memorex MPH2410 operating instructions Setting the Time and Date

MPH2410.O/M.QXD 3/7/03 9:35 AM Page 13

SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE TIME AND DATE

Change the Time and Date while in the Standby mode as follows:

1

2

12

Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.

3

Press the EDIT/FLASH button to change the setting; the month setting will blink.

5

1 2

Press the Scroll Down button ❶ three times or the 4 key button ❷; the Time Setting will appear.

4

Set the month using the Key buttons (0-9). Repeat this step to set the date, hour, and minutes; the AM/PM indicator will then be blinking.

6
2	1

Press the 1 Key button to choose AM

❶or the 2 Key button ❷ to choose PM.

When finished, press and hold the SAVE/RE/PA button ❶ for more than two seconds; a long beep will be heard to confirm the setting has been saved. You can continue with programming or press the VOICE MAIL/MENU button

❷to return to the Standby mode.

13