MPH2410.O/M.QXD 3/7/03 9:35 AM Page 14

SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE LCD CONTRAST

If you find the LCD screen difficult to read, set the contrast level while in the Standby mode as follows:

1

2

12

Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.

Press the Scroll Down button four times or the 5 key button ; the Contrast setting will appear.

3

4

1

 

 

2

 

 

Press the EDIT/FLASH button to change the setting; the Contrast setting will blink.

5

When the desired Contrast setting appears, press and hold the SAVE/ RE/PA button for more than two seconds; a long beep will be heard to confirm the setting has been saved.

Press the Scroll Up or Down button to adjust the Contrast level.

6

You can continue with programming or press the VOICE MAIL/MENU button to return to the Standby mode.

14

Page 15
Image 15
Memorex MPH2410 operating instructions Setting the LCD Contrast