MPH2410.O/M.QXD 3/7/03 9:35 AM Page 10
SET-UP INSTRUCTIONS
SETTING THE RINGER VOLUME
Set the ringer volume (HI, LOW, OFF) while in the Standby mode as follows:
1
2
Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.
Press the EDIT/FLASH button to change the setting; the Ringer Volume setting will blink.
3 | 1 |
|
| 2 | |
|
|
4
Press the Scroll Up ❶ or Down ❷ button to select a desired ringer volume (HI, LOW or OFF).
5
You can continue with programming or press the VOICE MAIL/MENU button to return to the Standby mode.
When the desired Ringer Volume setting appears, press and hold the SAVE/RE/PA button for more than two seconds; a long beep will be heard to confirm the setting has been saved.
NOTE:
A button must be pressed within 20 seconds, or the unit will revert back to the Standby mode.
10
