Memorex MPH2410 operating instructions Setting the PBX Number

MPH2410.O/M.QXD 3/7/03 9:35 AM Page 15

SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE PBX NUMBER

This feature will insert a number (0-9) before the outgoing number, if required. When a number is selected, the unit will automatically dial the preset PBX number and a pause before any speed dial or Caller ID callback. Set the PBX number while in the Standby mode as follows:

1

2

1

2

Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.

Press the Scroll Down button ❶ five times or the 6 key button ❷ once; the PBX Number setting will appear.

3

4	1
		2

Press the EDIT/FLASH button to change the setting; the PBX Number setting will blink.

Press the Scroll Up ❶ or Down ❷ button to select a PBX Number or Off (to turn the PBX setting Off).

5

6

When the desired PBX Number setting appears, press and hold the SAVE/ RE/PA button for more than two seconds; a long beep will be heard to confirm the setting has been saved.

You can continue with programming or press the VOICE MAIL/MENU button to return to the Standby mode.

15