Memorex MPH2410 operating instructions Storing Names & Telephone Numbers in the Phonebook

MPH2410.O/M.QXD 3/7/03 9:35 AM Page 28

TELEPHONE OPERATION (CONTINUED)

STORING NAMES & TELEPHONE NUMBERS IN THE PHONEBOOK

The memory can store up to 40 name/telephone numbers.

1

2

Press the DIR button while in the Standby mode.

Press the EDIT/FLASH button to create a new directory entry.

3

2

1

See the Character Map Chart on the top of the next page and using the Key buttons (0-9,*,#) ❶, enter the name. To move the cursor to the right, create a space or enter a new letter, press the Scroll Right ❷ button. For example, press the 4 button ❶ once to enter a “G”, then press the Scroll Right ❷. Press the 7 button ❶ three times to enter the second character, “R”. Repeat this step until all letters have been entered (up to 18).

41 3

2

5

Press the Scroll Down button ❶ and enter the telephone number using Key buttons (0-9,*,#) ❷. You can store up to 22 digits. Briefly press the SAVE/RE/PA button ❸ to insert a pause.

Press and hold the SAVE/RE/PA button to store the number into memory. Press the DIR button to return to the Standby mode, or if no buttons are pressed within 20 seconds, the unit will automatically revert back to the Standby mode.

NOTES:

•If the data is stored in a location where data has already been stored, the old data will be overwritten.

•When storing a telephone number, e.g. 9655588 into the Phonebook, the display will show 9 655 588. However, the correct format sequence of 965-5588 will display after it is saved.

•“MEMORY FULL” will appear in the display when there are no memory locations left.

•To edit a phone number after it has been typed in already, move through the number using the Scroll Left or Right button. To delete a character or number inside the cursor, press the DEL/CHAN button.

28