MPH2410.O/M.QXD 3/7/03 9:35 AM Page 17
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE PAUSE TIME
This unit enables you to change the number of seconds that a pause lasts when using programmed pauses in your speed dial numbers or after your PBX number. Set the Pause Time while in the Standby mode as follows:
1
2
1
2
Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.
Press the Scroll Down button ❶ seven times or the 8 key button ❷; the Pause Time setting will appear.
3
4 | 1 |
|
| 2 | |
|
|
Press the EDIT/FLASH button to change the setting; the Pause Time setting will blink.
5
When the desired Pause Time setting appears, press and hold the SAVE/ RE/PA button for more than two seconds; a long beep will be heard to confirm the setting has been saved.
Press the Scroll Up ❶ or Down ❷ button to select the desired Pause Time.
6
You can continue with programming or press the VOICE MAIL/MENU button to return to the Standby mode.
17
