MPH2410.O/M.QXD 3/7/03 9:35 AM Page 16
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE FLASH TIME
This unit enables you to select the standard flash time applicable to your calling area, which is useful when “clicking” over to a call waiting call or for PBX systems. If you are not sure of the flash time, call your local telephone company. Set the Flash Time while in the Standby mode as follows:
1
2
1
2
Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.
Press the Scroll Down button ❶ six times or the 7 key button ❷; the Flash Time setting will appear.
3
4 | 1 |
|
| 2 | |
|
|
Press the EDIT/FLASH button to change the setting; the Flash Time setting will blink.
5
When the desired Flash Time setting appears, press and hold the SAVE/ RE/PA button for more than two seconds; a long beep will be heard to confirm the setting has been saved.
Press the Scroll Up ❶ or Down ❷ button to select a desired Flash Time (in
6
You can continue with programming or press the VOICE MAIL/MENU button to return to the Standby mode.
16
