Configuring the 596 DVD Player
To configure specific options
●Highlight Meridian setup in the Setup menu, and press Enter.
The Meridian setup menu will be displayed:
To set configuration options
The configuration options are generally set to an appropriate value when you reset the 596 to the standard settings, and you should not normally need to alter them; see Choosing standard settings, page 52.
The options are summarised in the following table for advanced use:
Option | Default | Description |
Diagnostics | No | Set to Yes for a diagnostic |
|
| display on the |
|
| display. |
System address | 1 | Set to a value from 1 to 8. |
Product address | 1 | Set to a value from 1 to 8. |
Controller | Auto | Specifies whether the DVD |
|
| player is controller, not |
|
| controller, or set automatically. |
Start source | DVD | Specifies which source is |
|
| selected when switching on from |
|
| standby. |
Vol display | No | Specifies whether the DVD |
|
| player displays the volume for |
|
| the system. |
Fan | As | Set to Always to keep the fan |
| required | permanently on, or As required |
|
| to use it when necessary. |
Source config |
| Allows you to configure the |
|
| sources; see below. |
Configuring the DVD player
53
