Pull out the lamp unit | Meridian America D-ILA 1080MF1 specs

Lamp Replacement Procedure

1 Remove the control panel cover

• See page 10 for details on removing the control panel cover.

Control Panel Cover

2 Loosen the screw and remove the lamp cover

• Undo the retaining screw with a ‘+’ screwdriver.

Lamp Cover

Handle

3 Loosen the screws on the lamp unit and lift up the handle

• Loosen the 2 screws with a ‘+’ screwdriver.

4 Pull out the lamp unit

Lamp Unit

Page 28

Image 28

Meridian America D-ILA 1080MF1 Lamp Replacement Procedure Remove the control panel cover, Pull out the lamp unit

Contents

ILA 1080MF1 For Customer use FCC Information U.S.A. only Safety precautionsMachine Noise Information Germany only Product If in DOUBT, Consult a Competent Electrician Maintenance Procedures Information for Users on Disposal of Old Equipment EU OnlyEuropean Union Other Countries outside the European UnionPage Contents Accessories Controls & Features AC Power Input Socket Service ConnectorRear & Right Side Handling the Control Panel Cover Rx/Tx Indicators Control PanelMenu Button Exit Button Indicators Standby IndicatorOperate Indicator Temp Indicator Indicator Display Table Top panel indicatorsControl panel indicators Lamp replacement Remote Control Projector/Processor Select buttonsOn Button OFF Button Light Button Test Button main labelZoom Tele/Wide Buttons main labels 8 Installing the Projector View from the side Projector and Screen InstallationView from Above Screen Size and Projection Distance Wide T Tele Lens Shift Setting Adjust the projection screen positionRe-fit the lens shift cover Projection screen position image according to shift level Connecting to Devices Connecting a Video ProcessorConnecting a computer or Home Automation System via RS232 Interfacing the Projector Connecting the Power Cable Supplied Adjusting zoom image size and focus Turning off the powerApply Mains Power Precautions During Use Adjustments and Settings Using Menus Menu Structure After setting is completed, press the Exit button Accessing the Menus Press the Menu buttonMenu Operation Buttons Pixel Adjust Setup Menu Menu PositionColor Temp Red, Green, Blue Power Save Options Menu Menu DisplaySleep Time RC232C bps About Lamp Replacement When the lamp usage time reaches 2010 hoursReplacing the Lamp Lamp Replacement Procedure Remove the control panel cover Loosen the screw and remove the lamp coverLoosen the screws on the lamp unit and lift up the handle Pull out the lamp unit Tighten the screws of the lamp unit and fold down the handle Re-attach the lamp cover and fasten the screw Cleaning and Replacing the Filter On-screen warning messages About warning indicators For Nos Troubleshooting Power up Pinouts RS-232C Port Interface SocketsDVI-D Interface RS-232C External Control Numeric value External control command tableSpecial parameters Specifications Projector Dimensions All dimensions in millimetres