
SMX-M8xx Series USB2.0 Camera User Guide
29
Use one of the radio buttons on the Predefined control to set one of the predefined viewport sizes. The Viewport rectangle position may also be changed by dragging the video image in the View window.
Image Correction
The Image Correction controls are designed for setting up the camera's Brightness, Contrast and Gamma (see Figure
This correction is done programmatically by the camera firmware using the conversion
The default values of Brightness, Contrast and Gamma are set to 0; 0; 1, 00, respectively.
You can restore the default values of the Image Correction controls on any step of changes: simply click the Default button on the Image Correction tab.
The Best button, if applied, activates application to transform the
Note: The
With every change of any image correction controls, you can view a graphical interpretation of the dependence of the image's changes on the changes of the Image Correction controls (see Figure
Note: The default values of Image Corrections are the most suitable and recommended for performing White Bal- ance (Hard)
Color Balance
The Color Balance controls are designed to adjust the ratio of the main induced color components (Red, Green and Blue) on the image that is displayed by the camera software.
This correction is done on the software level and does not affect any electrical settings of the camera (see Figure
Sensor Control: Image Correction