SMX-M8xx Series USB2.0 Camera User Guide

31

Color Correction

The Color Correction controls are designed to adjust the intensity of the color properties (Brightness, Contrast and Saturation) of the image that is displayed by the camera.

This correction is also done on the software level and does not affect any electrical settings of the camera.

Check the Enable command to make the Color Correction controls available.

Use the Default button to restore the default values of Brightness, Contrast and

Saturation - 0,0; 1,00; 1,00, respectively (see Figure 4-3 The SMX-M8X Camera Application

Color Correction Controls).

 

Figure 4-3The SMX-M8X Camera Application Color Correction Controls

 

 

Note:

Use of the Controls done on the software level (Color Balance, Color Correction, White Balance (Soft), etc)

 

may cause an overloading of the computer's processor, especially when more than one camera is running

 

 

 

 

Note:

The Color Correction tab is disabled when running the SMX-M81M Camera (see Figure 4-4 Application’s main

 

window outlook when using the SMX-M81M Camera)

 

 

Sensor Control: Color Correction

Page 35
Image 35
Micron Technology USB Camera manual SMX-M8X Camera Application Color Correction Controls