SMX-M8xx Series USB2.0 Camera User Guide

41

1. Click the Frame Rate… button to open the Frame Rate Control window

2. Click the Set Maximum button to get the maximal value or click the Set Default button to get the default value

3. Close the window

Note:

When changing frame rate value manually, a warning message may appear. Usually it appears when the

 

entered value is lower than it is allowed. In this case, follow the instructions in the warning message (see Figure 7-

 

4 Warning message of the Frame Rate Control window)

 

 

Figure 7-4Warning message of the Frame Rate Control window

Output Bits per Pixel Control

10 bit - enables the software to transmit 10 bit images from the camera as opposed to regular 8 bit.

Median Filter

Median filter - turns on pixel averaging. The brightness of every single pixel becomes affected by the brightness of its neighbor pixels and the whole image becomes smoother.

Limit Gain

Limit Gain 10 - limits maximal value of Gain to 10.

Camera Device Settings: Output Bits per Pixel Control

Page 45
Image 45
Micron Technology USB Camera manual Output Bits per Pixel Control, Median Filter, Limit Gain