Problem solving guide
... during operation an unusually large amount of steam escapes or steam escapes from parts of the steam oven where it does not usually.
Check whether,
–the door is closed properly.
–the door seal is fitted correctly. If necessary press it in all the way round the door to make sure it is fitted evenly.
–the door seal is damaged, e.g. cracks can be seen. The seal must be replaced with a new one.
If this does not solve the problem, call the Miele Service Department.
... the p symbol appears in the time/temperature display and an audible tone may sound.
Check whether,
–the water container has been pushed right into the appliance so that it connects.
–there is sufficient water in the water container. The water level must be between the two markings.
... when the appliance is switched on, the k symbol and a number between 1 and 10 appear in the time/temperature display or the k symbol is highlighted in the function display.
The appliance needs to be descaled. Proceed as described in “Descaling” in "Cleaning and care".
... the fault message F05 or F06 appears in the time/temperature display.
Switch the appliance off and call the Service Department.
... the fault message F20 appears in the time/temperature display.
The appliance does not heat up.
Check whether the water container has been pushed right into the appliance so that it connects.
Switch the appliance off and then back on again. If the fault occurs several times, switch the appliance off and call the Service Department.
... after a period of time, the door makes a noise when it is opened and closed.
Lubricate the hinges with the silicone grease supplied.
54
