Before using for the first time
Setting the water hardness
The steam oven is set at the factory to water hardness setting IV (hard 4).
If your water hardness level differs from this you will need to
You can use the test strip supplied to check the water hardness level, or your local water supplier will be able to advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to the German scale 1 to >21 °dH (0.2 - 3.8 mmol/l).
|
|
|
Hardness | Display | Hardness |
level |
| range |
|
|
|
I | Soft 1 | |
|
| 1.3 mmol/l) |
|
|
|
II | Medium | |
| 2 | |
|
|
|
III | Hard 3 | |
|
| - 3.8 mmol/l) |
|
|
|
IV | Very | >21 °dH |
| hard 4 | (above 3.8 |
|
| mmol/l) |
|
|
|
|
|
|
Proceed as follows:
^Turn the function selector to the C symbol.
^Press the function selector to confirm your selection.
^Turn the function selector to the I symbol.
^Press the function selector to confirm your selection.
^Press the function selector to confirm your selection.
^Turn the function selector until you see the hardness level required, e.g. "medium 2" and confirm your selection.
"Back" will then appear in the display. Press the function selector twice and turn it to Q to return to the Start display.
17