4-2. Front Panel Controls (See Section 4-3)
15 | 14 | 13 |
1
4
12
Program | Volts | Arc Adjust |
|
3 |
| Wire Speed | Amps |
| 11 |
|
|
|
|
| |
| Process |
|
| Wirefeed |
|
| Wire Type |
|
| Gas | 10 |
| Gas Type |
|
| Contactor |
|
5 |
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
| 8 |
7 | Setup | Adjust |
| Arc Control | 9 |
|
|
2
. When an LED is lit, it means the related function is active.
1 Program Display
Displays the number of the active program.
2 Adjust Knob
Turn the Adjust knob to change program number, Setup, Arc Control, and weld parameters.
3 Program Push Button LED
The LED lights when the Program Push Button is active.
4 Program Push Button
Press push button (LED lights) and turn Adjust knob to select active program.
The letter C is displayed with the program number if the program has been changed from the factory settings using the optional PDA with File Management/WaveWriter software (see File Management/WaveWriter Owner’s Manual).
.The program cannot be changed through the front panel while welding.
Press and hold button to see program name. Custom programs are named using optional
PDA with File Management/WaveWriter software. Program name is shown in upper and lower displays (items 13 and 15).
5 Setup Mode Indicators
The lit LED indicates which setup mode is active. Setup mode parameters are shown in Display Windows (see Items 13 and 15).
Process LED
When this LED is lit, turn the Adjust knob to select the desired weld process. Choices include pulse welding (displayed as PULS),
Wire Type LED
When this LED is lit, turn the Adjust knob to select the desired wire type, wire alloy, and size. Wire type and size choices vary according to the selected weld process. Choices may include steel (displayed as STL), stainless steel (SS), metal core (MCOR), aluminum (ALUM). See Table
198 993
Gas Type LED
When this LED is lit, turn the Adjust knob to select the desired weld gas. Gas type choices vary according to the selected weld process.
See Table
6 Setup Push Button LED
The LED lights to indicate one of the setup modes is active.
7 Setup Push Button
Press button to select Process, Wire Type, Wire Diameter, or Gas Type parameters.
.In order for selections to be retained in memory, the Setup push button must be pressed six times before any other push button is pressed: once to select Process, again to select Wire Type, again to select Wire Alloy, again to select Wire Size, again to select Gas Type, and a sixth time to store selections in memory. The displays will temporarily show “PROG LOAD” to indicate the data is being stored in memory.
